If you’re looking for the perfect guide on how to empty a Bunn coffee maker, then you’re on the right page. Draining water from a Bunn coffee maker is very easy and shouldn’t take much time at all.
It is important to always empty the coffee maker to not only ensure that the next coffee you brew comes out tasting right but so also that the water inside doesn’t damage the machine.
In this article, you’re going to find a step-by-step guide on how to empty a Bunn coffee maker.
How to Empty a Bunn Coffee Maker
You can empty a Bunn coffee maker in just four steps, and these are quite easy to follow. Ensure that you follow the steps in the right order, especially if this is your first time doing so.
Step 1: Unplug the Electricity Wire
Before you get right down to emptying the coffee maker, you need to turn off the power by unplugging the wire of the machine. This is an important step, especially if the coffee maker is close to your sink. You might want to go right ahead and pour the contents into the sink but if you do that with the power on, it could lead to electric shocks and other problems.
Step 2: Cool the Hot Water
If there is hot water in the water tank, you should let it cool first before emptying the Bunn coffee maker. To cool down the water, you will have to pour cold water into the tank. Simply open the lid and pour it right into the brewer. With the hot water in the brewer cooled down, you can go ahead and flush out the hot water.
To do this place the craft into the warming plate and close the lid of the coffee maker.
The cold water will start pushing the hot water into the craft.
This process will have to be repeated twice or until all the hot water is flushed from the water tank.
Step 3: Drain Out Cold Water
Once done, you will have to drain out the cold water.
To do this, you will have to remove the brew funnel and spray head. Simply rotate both parts in the anti-clockwise direction and they would come off easily. Now, put both parts aside on the table.
Grab the coffee maker and take it to the sink. Move the coffee maker to a position that the water will flow from the spray tube and top lid. Ensure you’re in a comfortable position as this process could take a while.
Keep the coffee maker in that same position until all the cold water flows out of the spray head tube and the top lid of the brewer. Once all the cold water is out, you’ve successfully emptied the Bunn coffee maker.
Step 4: Assemble All Parts
The next step would be to reassemble the parts that you removed during the draining process. While removing the parts, it is important for you to take note of how it looks like and what goes into what. This is important for first-time users who are not yet familiar with the Bunn coffee maker.
Start by assembling the spray head. Take the spray head and fix it back into position. You need to rotate it in the clockwise direction and then insert the brew funnel.
Do this carefully so you won’t damage any parts of the coffee maker. If you notice any resistance while trying to fix the parts back in, don’t force them in. Take them out and ensure you do it correctly.
Once you’re able to get them back in, you’re done with the entire process.
How to Maintain Your Bunn Coffee Maker
Cleaning your Bunn coffee maker is very important. With the right maintenance steps, the machine will last you longer and serve you well. To clean it:
- Turn off the coffee maker and unplug from the power source. Allow it to cool before you start cleaning.
- With a damp cloth and some detergent, clean off the exterior surfaces.
- Rinse the exterior surfaces with warm water and then dry.
- Also, take out the spray head of the coffee maker and clean it to remove any minerals.
- You should also clean the fitting of the spray head to also remove minerals.
- The final step is to clean the bypass fitting section of the coffee maker.
- Once you’re done, you will have to fix back all the removed parts.
Draining your Bunn coffee maker shouldn’t take much of your time; however, it is quite necessary to ensure that the Bunn coffee maker doesn’t get damaged. You should also clean the machine as much as you use it. Proper maintenance is the best way to get top-notch performance from the machine every time you want to brew.